JVC DVD Player Universal Remote Codes

Unlocking the Power of Your JVC DVD Player Universal Remote Codes and Programming

Are you struggling to sync your JVC DVD remote with other devices? Don’t fret; this article is here to lend you a helping hand. In this post, we’ve compiled an extensive list of codes for JVC DVD players and provided step-by-step instructions to simplify the remote setup process. Even if you’re a beginner, follow these instructions diligently, choose the right JVC DVD remote codes, and you’ll soon enjoy seamless control over your entertainment system.

JVC DVD Universal Remote Codes List

1.1 Universal Remote Codes For JVC DVD VCR Combo

How to Program JVC DVD Universal Remote

Have you ever wondered how to program your JVC DVD remote to manage multiple devices? As mentioned earlier, the first crucial step is to secure the correct JVC DVD universal remote codes. If you don’t get it right on the first try, keep at it until you’ve found the correct code. Here’s how to program your JVC DVD remote:

How to Program JVC DVD Universal Remote Without Codes

In the auto search method, your universal remote goes through a scanning process. It scans one code at a time to determine the correct remote code that works with your device. Follow these steps:

  1. Switch On: Turn on the smart device you want the universal remote to operate, such as your TV.
  2. Turn On the Remote: Press and hold the device button (TV, DVD, CBL, and OK/SEL) for 3 seconds. The LED light will indicate that the device is ready to be programmed.
  3. Point and Click: Point the remote at the device and click on the “CH+” and “CH-” buttons. The remote will display on/off signals. Press the “up” or “down” key continuously until the device turns off.
  4. Verify the Code: Confirm the code by pressing the “power” key. If the device turns on, try changing the channel to ensure the remote is programmed correctly.
  5. Save the Code: Tap the “device” button to save the code. The device’s LED will blink twice to confirm that the code has been stored.

How to Program JVC DVD Universal Remote With Manual Method

Using the keycode, you can easily program a universal remote. The keycode identifies the make and model of your equipment. Follow these steps:

  1. Turn The Device On: Start by turning on the device you want to control.
  2. Press “TV” on Your JVC DVD Universal Remote: Press and hold the “Setup button” on the Universal Remote until it flashes, indicating it’s in “Learning mode.”
  3. Enter the Keycode: Enter the keycode you obtained from the programming guide (Instructions Booklet).
  4. Point and Hold: Point your remote at the TV and hold down the “Power” button.
  5. Release the Power Button: Release the “Power Button” when the screen switches off.
  6. That’s it! Your TV should now work perfectly with the universal remote control. If it doesn’t, try repeating the procedure with a different code from the same reference table.

How to Program JVC DVD Universal Remote With Code Search

If you can’t find the key code that works for your device, you can set up your universal remote to search for it. This is a manual code search mode. Follow these steps:

  1. Turn The Device On: Make sure your device is powered on.
  2. Press and Hold “Setup”: On the universal remote, press and hold the “Setup” button.
  3. Enter the Code: Enter “9-9-1” (a three-digit code).
  4. Hold the Power Button: Hold down the “Power Button” on the remote and then press the “Channel up” button repeatedly until the device, in this case, your TV, turns off.

While this method might take a bit more time, it’s essential for finding the right key code. Once you’ve completed the procedure, your remote should work for all functions.


Have you successfully programmed your JVC DVD remote using the codes provided? We’d love to hear about your experience. Please share the code you used that matched with your device in the comment box below. Your feedback and suggestions are always welcome.


Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *