Konka TV Universal Remote Codes Easy Setup

or all the dedicated Konka TV users out there, we’ve got the inside scoop on how to make your TV experience even better. Say goodbye to the hassle of juggling multiple remote controls and say hello to simplicity. We’re here to provide you with a comprehensive guide on Konka TV remote codes and programming instructions that will make your TV setup a breeze. So, grab your universal remote control and let’s dive into the world of Konka TV programming!

Table of Contents

VIZIO Universal Remote Codes for Konka TV

Are you ready to take control of your Konka TV with a VIZIO universal remote? Here are the codes you need to make the magic happen:

0047
0016
0053
0413
0029
0066
0412
0011
0103

RCA Universal Remote Codes For Konka TV

RCA has your back when it comes to Konka TV programming. Here are the codes you need to know:

3353
3354

GE & One-For-All Universal Remote Codes For Konka TV

When it comes to universal remotes, GE and One-For-All have got you covered. Check out these codes:

0016
0011
0066
0029
0413
0053
0412
0103
0047

Philips Universal Remote Codes For Konka TV

Unlock the potential of your Konka TV with a Philips universal remote. Here are the codes you’ve been searching for:

0208
0306
0702
0906
0842
0911
0203
0504
0942

How To Program A Konka TV Universal Remote?

There are three straightforward ways to set up your universal remote for your Konka TV: Using a Keycode, Programming Via Universal Remote Code Search, and Manual Setup.

How to Program Konka TV Universal Remote Without Codes

In the auto search method, your universal remote does the heavy lifting for you. Here’s how it works:

“Switch On” the smart device, like your “TV,” that you want the universal remote to operate.
“Turn on” the remote, and tap on the device button (TV, DVD, CBL, and OK/SEL) for 3 seconds. The LED light indicates the device is ready to program.
Point the remote at the device and click on “CH+” & “CH-” switches. The remote will show on/off signals. Press the “up” or “down” key continuously until the device turns off.
Verify the code by clicking on the “power” key. The device should turn on. If it starts, try changing the channel to verify that the remote is programmed correctly.
Now, tap the “device” button to save the code. The LED of the device will blink twice to confirm that the code is stored.

How to Program Konka TV Universal Remote With Manual Method

Using the keycode, you can easily program a universal remote. Follow these steps:

First, “Turn The Device On.”
Press the “TV” button on your “Konka TV universal remote.”
Now, press and hold the “Setup button” of the Universal Remote until it shows a “Light Flash” (indicating it is in “Learning mode”).
Finally, enter the “Keycode” from the programming guide (Instructions Booklet).
Once done, point your remote at the TV and press and hold the “Power” button.
Release the “Power Button” when the screen switches off.
That’s it! Your TV will work perfectly with the universal remote control. If it doesn’t, try repeating the procedure with a different code from the reference table.

How to Program Konka TV Universal Remote With Code Search

If you couldn’t find the key code that works for your device, it’s time to put your universal remote into search mode. Here’s how:

First of all, “Turn The Device On.”
Now, press and hold the “Setup” button.
Enter the “9-9-1” (three digits) code.
Hold down the “Power Button” on the remote and press the Channel up button until the device, in this case, your TV, “Turns Off.”
This method might take some extra time, but it’s crucial to find your key code. Once you’ve completed the procedure, your remote should work for all functions.

Conclusion

We believe in the power of community. If you have any other working methods that we haven’t mentioned, please share them below with simple steps. And if you’ve encountered any issues with the universal remote codes we provided, let us know your universal remote control brand and the code you entered. We’re here to make your Konka TV experience the best it can be!