LG Soundbar Universal Remote Codes

Are you tired of juggling multiple remotes to control your LG Soundbar? Fret not! Whether you have a universal remote, a cable remote, or a SAT remote, we’ve got you covered with the essential codes and programming instructions to simplify your audio experience.

LG Soundbar 4 Digit Universal Remote Control Codes:

• 1293
• 4041
• 4025

LG Soundbar 5 Digit Universal Remote Control Codes:

• 32676
• 31953
• 31293
• 11993

GE Universal Remote Codes For LG Sound Bar

• 0972

Cox Remote Codes For LG Sound Bar

• 3217

How To Program LG Soundbar Universal Remote?

Struggling to get your LG Soundbar to obey your remote’s commands? Let’s demystify the process:

1. Turn The Device On: Ensure your LG Soundbar is powered up.
2. Press and hold the “Setup” button: On your universal remote, locate and press the “Setup” button.
3. Enter the “9-9-1” code: Input this three-digit code, signaling your remote to start searching.
4. Hold down the “Power Button”: On the remote, press and hold the “Power Button” while repeatedly pressing the Channel Up button. Continue until your TV turns off.
5. Select: Once you notice the volume change, click on “Select” to lock in the code.
6. Troubleshooting Tip: If the DirecTV remote fails to turn your soundbar on or off, try using the middle PWR key in the AV1 or AV2 device—it controls the Soundbar.

Feeling stuck? Don’t worry; we’ve got more solutions coming your way.

How to Program LG Soundbar Universal Remote Without Codes

In a bind and don’t have the codes? No problem! Try the auto search method:

1. Switch On Your Device: Turn on the device you want the universal remote to control, such as your TV.
2. Prepare the Remote: Activate the remote by holding down the device button (e.g., TV, DVD, CBL, or OK/SEL) for 3 seconds. The LED light will signal readiness.
3. Point and Click: Direct the remote towards the device and press the “CH+” and “CH-” buttons. The remote will emit on/off signals. Keep pressing until the device turns off.
4. Verify the Code: Press the “Power” key. If the device powers on, try changing the channel to confirm that the remote is correctly programmed.
5. Save the Code: Tap the “Device” button to save the code. The LED on the device will blink twice to confirm.

How to Program LG Soundbar Universal Remote With Manual Method

If you prefer a manual approach, follow these steps:

1. Turn The Device On: Make sure your LG Soundbar is on.
2. Press the “TV” button: Locate the “TV” button on your LG Soundbar universal remote and press it.
3. Enter Learning Mode: Hold down the “Setup” button until the light flashes—this indicates it’s in “Learning mode.”
4. Enter Keycode: Input the keycode you found in the programming guide (Instructions Booklet).
5. Power Up: Point your remote at the TV and press and hold the “Power” button. Release it when the screen switches off.

That’s it! Your TV should now respond to your universal remote. If it doesn’t, repeat the process with a different code from the same reference table.

While the manual method may take a bit more time, it’s crucial to find the right key code for your specific equipment. Once you’ve done this, your remote should work seamlessly for all functions.

Conclusion

We hope this guide has unlocked the potential of your LG Soundbar and remote control setup. If you encounter any issues or need further assistance, please leave your query in the comment section below. Share your universal remote model and LG Soundbar model number, and we’ll promptly resolve any lingering issues. Your audio experience is our priority!