The Comprehensive Guide to Element Universal Remote Codes and Programming Instructions
Do you own an Element TV with a brand-new universal remote and find yourself puzzled about how to set it up? Look no further. In this all-encompassing guide, we will lead you through the process of programming your Element TV with universal remote codes. Whether you prefer the manual method or the code search approach, we have you covered. Let’s delve into the realm of Element Universal Remote Codes and Programming Instructions.
Table of Contents
- Element Universal Remote Codes List 1.1. Element 4 Digits Universal Remote Codes 1.2. Element 5 Digits Universal Remote Codes 1.3. Element 3 Digits Universal Remote Codes
- How to Program Your Element TV Remote
- How to Program Element Universal Remote Without Codes
- How to Program Element Universal Remote With Manual Method
- How to Program Element Universal Remote With Code Search
Element Universal Remote Codes List
To get your Element TV up and running with a universal remote, you’ll need the correct codes. Here’s a list of brand-specific Element Remote Codes:
| Brand | Universal Remote Codes |
|---|---|
| GE | 1091, 1651, 5361, 2401, 1025, 5341, 5471, 6021, 4111, 5841, 5831, 5421, 5411, 1173 |
| RCA | 13907, 3559, 1886, 12964, 2183, 14217, 1687, 13559, 12183, 11687, 12256, 2964, 11886 |
| Magnavox | 0073, 0088, 0001 |
| Philips | 14156, 1918, 5361, 5421, 5831, 3477, 11147, 14023, 1651, 1091, 5841, 5471, 13656, 14175, 6021, 10862, 4111, 2401, 5411, 5341, 11068, 11568 |
| Westinghouse | 0143, 0114, 1146, 0002 |
| Xfinity | 13559, 11687, 12183, 12964, 13907, 11886 |
| Jumbo | 238, 247, 252, 168, 121, 127, 151, 153, 154, 231, 236, 004, 2183 |
| Cox | 1687, 1886, 2183 |
| Verizon | 3264 |
| Comcast Xfinity | 13559, 11687, 11886, 11864, 12183, 10178, 12964, 12260, 13907 |
| RCA 3 in 1 | 11687, 12964, 13559, 11886, 12183 |
Element 4 Digits Universal Remote Codes
- 1687
- 1886
- 2183
- 3264
Element 5 Digits Universal Remote Codes
- 11886
- 10178
- 11687
- 12183
Element 3 Digits Universal Remote Codes
- 046
- 005
- 028
- 043
- 048
- 076
- 096
- 155
- 004
- 051
- 127
- 151
- 153
- 154
- 231
- 236
- 238
- 247
- 252
- 168
- 121
How to Program Your Element TV Remote
In this section, we’ll explore three methods to program your Element TV with a universal remote using the codes provided above.
How to Program Element Universal Remote Without Codes
In the auto search method, the universal remote scans codes one by one to find the correct one for your device. Follow these steps:
- Switch On: Turn on your device, such as your “TV,” that you want the universal remote to operate.
- Remote Activation: Turn on the remote and hold the device button (TV, DVD, CBL, and OK/SEL) for 3 seconds. The LED light will indicate that the device is ready for programming.
- Code Scanning: Point the remote at the device and press “CH+” and “CH-” switches. The remote will emit on/off signals. Keep pressing the “up” or “down” key until the device turns off.
- Verify the Code: Click the “power” key to see if the device turns on. If it does, try changing the channel to ensure the remote is programmed correctly.
- Saving the Code: Tap the “device” button to save the code. The LED on the device will blink twice, confirming that the code has been stored.
How to Program Element Universal Remote With Manual Method
The manual method uses a specific keycode to program your universal remote to work with your device. Here’s how to do it:
- Turn The Device On: Start by turning on your device.
- Select TV: Press the “TV” button on your Element universal remote.
- Setup Mode: Press and hold the “Setup button” on the Universal Remote until the LED light flashes (indicating it’s in “Learning mode”).
- Enter Keycode: Enter the keycode from the programming guide (Instructions Booklet) that corresponds to your device.
- Power On: Point your remote at the TV and press and hold the “Power” button.
- Completion: Release the “Power Button” when the screen switches off.
That’s it! Your TV should now work seamlessly with the universal remote control. If it doesn’t, you can try the same procedure with a different code from the reference table.
How to Program Element Universal Remote With Code Search
If you couldn’t find the correct keycode, you can set up your universal remote in search mode to find it. Here’s how:
- Turn The Device On: Start by turning on your device.
- Setup Mode: Press and hold the “Setup” button.
- Enter Code: Enter “9-9-1” (a three-digit code).
- Power Button: Hold down the “Power Button” on the remote and then press the Channel up button repeatedly until the device (in this case, your TV) turns off.
This method might take a bit longer, but it’s crucial to find the right keycode. Once you’ve completed these steps, your remote should work for all functions.
Conclusion
If you encounter any issues or interruptions with the codes, try using an alternative code from the list provided. If you still face challenges, leave a comment with your query, and we will assist you as soon as possible. Setting up your Element TV with a universal remote is now a breeze with these comprehensive instructions.
